Tempered glass · cut for one phone
OnePlus 12R
6.78" · Centre punch-hole · 2.5D contoured edge · 0.33mm · 9H
₹649
Inclusive of all taxes. ₹50 delivery — free with the 10-pack. Saves against buying 3s.
Order before 4 PM IST — dispatched today from Bengaluru.
5 × tempered glass · 1 × alignment frame · 5 × cleaning pads · dust-lift stickers · TG-ONE-ONEPLUS12R-REG-05
What fits
Why this fits your OnePlus 12R
- Display
- 6.78"
- Aspect
- 19.8:9
- Edge
- 2.5D contoured edge
- Cutout
- Centre punch-hole
- Unlock
- Optical in-display reader
- Thickness
- 0.33mm
The 12R uses a gentler edge than the OnePlus 12, which allows a cut that reaches closer to the frame. Sized to the active panel with a centred punch-hole relief.
A different panel from the OnePlus 12 despite the similar size — the two are not interchangeable.
Doesn't fit: OnePlus 12 — different panel size or cutout, despite being in the same OnePlus 12.
In every pack
5×
Protector sheets
1×
Alignment frame
5×
Alcohol pad + cloth
5×
Dust-lift stickers
Fitting it
Four steps, ten minutes
- 01
Wipe with the alcohol pad, then the microfibre. Lift any remaining dust with a sticker — a single speck is what causes a permanent bubble.
- 02
Seat the alignment frame over the OnePlus 12R. It registers against the frame edges, so there is only one way it sits.
- 03
Peel the backing, lower the glass onto the centre of the panel and let go. The adhesive pulls itself outward from the middle.
- 04
Press any remaining edge gently toward the border. Small perimeter bubbles clear on their own within 24 hours.
Which finish should you choose?
| Attribute | Regular | Matte | Privacy |
|---|---|---|---|
| Clarity | Excellent | Soft | Excellent head-on |
| Fingerprints | Standard | Strongly reduced | Standard |
| Glare | Standard | Strongly reduced | Standard |
| Privacy | No | No | Yes (±30°) |
| Gaming | Good | Excellent | Good |
| Best for | Everyday use, video, photography | Gaming, outdoors, heavy use | Commuting, open offices, travel |
More in the OnePlus 12
Before and after
